View IH5019_81964.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IH5009-5012, 5014, 5016-5020, 5022, 5024
May 1999
T NT DUC PRO LACEME 747 Virtual Ground Analog Switch TE 7 E P SOL DED RE 800-442OB MEN ns 1 .com COM pplicatio @harris Features Description RE NO ntral A entapp Ce : l20cVolts Peak-to-Peak * Switches Analog Call r Up to Signals emai The IH5009 series of analog switches were designed to fill o
* Each Channel Complete - Interfaces with Most Integrated Logic * Switching Speeds Less Than 0.5s * ID(OFF) Less Than 500pA Typical at 70oC * Effective rDS(ON) - 5 to 50 * Commercial and Military Temperature Range Operation the need for an easy-to-use, inexpensive switch for both industrial and military applications. Although low cost is a primary design objective, performance and versatility have not been sacrificed.
Each package contains up to four channels of analog gating and is designed to eliminate the need for an external driver. The odd numbered devices are designed to be driven directly from TTL open collector logic (15 volts) while the even numbered devices are driven directly from low level TTL logic (5 volts). Each channel simulates a SPDT switch. SPST switch action is obtained by leaving the diode cathode unconnected; for SPDT action, the cathode should be grounded (0V). The parts are intended for high performance multiplexing and commutating usage. A logic "0" turns the channel ON and a logic "1" turns the channel OFF.
Part Number Information
PART NUMBER IH5009 IH5010 IH5011 IH5012 IH5014 IH5016 IH5017 IH5018 IH5019 IH5020 IH5022 IH5024 packages only. CHANNELS 4 4 4 4 3 3 2 2 2 2 1 1 LOGIC LEVEL +15 +5 +15 +5 +5 +5 +15 +5 +15 +5 +5 +5 PACKAGE DD, PD DD, PD DE, PE DE, PE DD, PD DE, PE PA DD, PA DE, PA DE, PA DD, PA PA PKG NO. IH50XX M DE PACKAGE PA - 8 LEAD PDIP PD - 14 LEAD PDIP PE - 16 LEAD PDIP DD - 14 LEAD CERDIP DE - 16 LEAD CERDIP TEMPERATURE RANGE M = MILITARY (-55oC to 125oC) C = COMMERCIAL (0oC to 70oC) BASIC PART NUMBER
NOTE: Mil-Temperature range (-55oC to 125oC) available in ceramic
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. Copyright
(c) Harris Corporation 1999
File Number
3129.1
4-1
IH5009 Series Functional Diagrams (Numbers in brackets refer to CERDIP Packages)
IH5009, IH5010 (14 LEAD CERDIP, 14 LEAD PDIP) IH5011, IH5012 (16 LEAD CERDIP, 16 LEAD PDIP)
IH5014 (14 LEAD CERDIP, 14 LEAD PDIP)
IH5016 (16 LEAD CERDIP, 16 LEAD PDIP)
IH5017 (8 LEAD PDIP) IH5018 (8 LEAD PDIP, 14 LEAD CERDIP)
IH5019, IH5020 (8 LEAD PDIP, 16 LEAD CERDIP)
IH5022 (8 LEAD PDIP, 14 LEAD CERDIP)
IH5024 (8 LEAD PDIP)
4-2
IH5009 Series
Absolute Maximum Ratings
Positive Analog Signal Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Negative Analog Signal Voltage . . . . . . . . . . . . . . . . . . . . . . . . .-15V Diode Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Power Dissipation (Note) . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Thermal Information
Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
Operating Conditions
Temperature Range 5009C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0oC to 70oC 5009M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE: Dissipation rating assumes device is mounted with all leads welded or soldered to printed circuit board in ambient temperature below 75oC. For higher temperature, derate at rate of 5m/WoC.
Electrical Specifications
(Per Channel) (NOTE 4) TEST CONDITIONS ALL 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts 5V Logic Ckts 15V Logic Ckts All All All f = 100Hz (NOTE 2) TYPE VIN = 0V, ID = 2mA VIN = +4.5V, VA = 10V VIN = +11V, VA = 10V Note 3 Note 3 Note 3 Note 3 VIN = +4.5V, VA = 10V VIN = +11V, VA = 10V VIN = 0V, IS = 1mA VIN = 0V, IS = 1mA VIN = 0V, IS = 2mA VIN = 0V, IS = 2mA ID = 2mA, VIN = 0.5V ID = 2mA, VIN = 1.5V -55oC (M) 0oC (C) MIN/MAX 0.5 1.5 150 100 25oC TYP 0.01 0.04 0.04 0.02 0.02 0.30 0.10 90 80 150 300 120 MIN/MAX 0.5 0.5 0.5 0.5 1.5 4.5 11.0 0.5 0.5 1.0 0.5 1.0 2.0 150 100 500 500 125oC(M) 70oC (C) MIN/MAX 100 20 20 0.5 1.5 4.5 11.0 20 20 1000 (M) 200 (C) 500 (M) 100 (C) 10 100 385 (M) 240 (C) 250 (M) 160 (C) -
PARAMETER Input Current-ON Input Current-OFF Input Current-OFF Channel Control Voltage-ON Channel Control Voltage-ON Channel Control Voltage-OFF Channel Control Voltage-OFF Leakage Current-OFF Leakage Current-OFF Leakage Current-ON Leakage Current-ON Leakage Current-ON Leakage Current-ON Drain-Source ON-Resistance Drain-Source ON-Resistance Turn-ON Time Turn-OFF Time Cross Talk NOTES:
(NOTE 1) SYMBOL IIN(ON) IIN(OFF) IIN(OFF) VIN(ON) VIN(ON) VIN(OFF) VIN(OFF) ID(OFF) ID(OFF) ID(ON) ID(ON) ID(ON) ID(ON) rDS(ON) rDS(ON) t(ON) t(OFF) CT
UNITS A nA nA V V V V nA nA nA nA A A ns ns dB
1. (OFF) and (ON) subscript notation refers to the conduction state of the FET switch for the given test. 2. Refer to Figure 1 for definition of terms. 3. VIN(ON) and VIN(OFF) are test conditions guaranteed by the tests of rDS(ON) and ID(OFF) respectively. 4. "5V Logic CKTS" applies to even-numbered devices. "15V Logic CKTS" applies to odd-numbered devices.
4-3

▲Up To Search▲

Price & Availability of IH5019

	To Download IH5019 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .